HP 10504 - Preparing for Installation; Safety Recommendations; General Safety Recommendations; Electricity Safety

1
Preparing for installation
The HP 10500 Switch Series includes the models in Table 1.
Table 1 HP 10500 Switch Series models
Switch model Product code HP descri
p
tion
RMN
10504
JC613A HP 10504 Switch Chassis BJNGA-AC0005
JG820A HP 10504 TAA-compliant Switch Chassis BJNGA-AC0005
10508
JC612A HP 10508 Switch Chassis BJNGA-AC0004
JG821A HP 10508 TAA-compliant Switch Chassis BJNGA-AC0004
10508-V
JC611A HP 10508-V Switch Chassis BJNGA-AC0003
JG822A HP 10508-V TAA-compliant Switch Chassis BJNGA-AC0003
10512
JC748A HP 10512 Switch Chassis BJNGA-AC0006
JG823A HP 10512 TAA-compliant Switch Chassis BJNGA-AC0006
IMPORTANT:
For regulatory identification purposes, the switches are assigned regulatory model numbers (RMNs). The
RMNs should not be confused with the marketin
g
name HP 105XX, or product codes JC611A, JC612A,
J
C613
A
, JC748A, JG820A, JG821A, JG822A, and JG823A.
Safety recommendations
To avoid possible bodily injury and equipment damage, read all safety recommendations carefully
before installation. Note that the recommendations do not cover every possible hazardous condition.
General safety recommendations
• Keep the chassis clean and dust-free.
• Do not place the switch on a moist area, and avoid liquid flowing into the switch.
• Make sure the ground is dry and flat and anti-slip measures are in place.
• Keep the chassis and installation tools away from walk areas.
• Do not wear loose clothing, jewelry (for example, necklace) or any other things that could get
caught in the chassis when you install and maintain the switch.
Electricity safety
• Clear the work area of possible electricity hazards, such as ungrounded power extension cables,
missing safety grounds, and wet floors.
• Locate the emergency power-off switch in the room before installation so you can quickly shut power
off when an electrical accident occurs.