HP 10504 - Switching Fabric Module Leds

83
Table 45 SFP+ port LED description
LED status Descri
p
tion
Flashing yellow The SFP+ port is receiving or sending data at 100/1000 Mbps.
Flashing green The SFP+ port is receiving or sending data at 10 Gbps.
Steady yellow A 100/1000 Mbps link is present.
Steady green A 10 Gbps link is present.
Off No link is present.
XFP port LEDs
Each XFP port has two LEDs (LINK and ACT) to show link status and activities.
Table 46 XFP port LED description
LIN
K
ACT Descri
p
tion
On Flashing A link is present, and the XFP port is receiving or sending data.
On Off A link is present, but no data is being received or sent.
Off Off No link is present.
QSFP+ port LEDs
Each QSFP+ port has one LED to show link status and activities.
Table 47 QSFP+ port LED description
LED status Descri
p
tion
Flashing The QSFP+ port is receiving or sending data.
On A link is present, but no data is being received or sent.
Off No link is present.
CFP port LEDs
The LPUs provide a LED for each CFP port to indicate the link status and data receiving/forwarding status
of the CFP ports.
Table 48 CFP port LED description
LED status Descri
p
tion
Flashing The CFP port is receiving or sending data.
On A link is present, but no data is being received or sent.
Off No link is present.
Switching fabric module LEDs
The switching fabric module has one RUN LED and one ALM LED to indicate its operating status.