EasyManua.ls Logo

HP 280 G3 - Specifications; Chassis; Temperature Range; Relative Humidity (noncondensing)

HP 280 G3
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
C Specications
U.S. Metric
Chassis
Height 3.74 in 95 mm
Width 10.63 in 270 mm
Depth 11.65 in 296 mm
Approximate Weight 9.23 lb 4.2 kg
Temperature Range
Operating 32° to 104°F 0° to 40°C
Nonoperating -22° to 140°F -30° to 60°C
NOTE: Operating temperature is derated 1.0° C per 300 m (1000 ft) to 3000 m (10,000 ft) above sea level; no direct sustained
sunlight. Maximum rate of change is 10° C/Hr. The upper limit may be limited by the type and number of options installed.
Relative Humidity (noncondensing)
Operating 10-90% 10-90%
Nonoperating (38.7°C max wet bulb) 5-95% 5-95%
Maximum Altitude (unpressurized)
Operating 10,000 ft 3048 m
Nonoperating 30,000 ft 9144 m
Power Supply
Output 180W
Eciency Up to 85%
Operating Voltage Range 90-264 VAC
Rated Voltage Range
1
100-240 VAC
Rated Line Frequency 50-60 Hz
Operating Line Frequency 47-63 Hz
1
This system utilizes an active power factor corrected power supply. This allows the system to pass the CE mark requirements for use
in the countries of the European Union. The active power factor corrected power supply also has the added benet of not requiring an
input voltage range select switch.
105

Table of Contents

Other manuals for HP 280 G3

Related product manuals