HP 280 G3 - Recovering the Configuration Settings

●
Hyper-Threading (enable/disable). Default is enabled.
●
NIC PXE Option ROM Download (enable/disable). Default is enabled.
Recovering the Conguration Settings
This method of recovery requires that you rst perform the Save to Removable Media command with the
Computer Setup (F10) Utility before Restore is needed. (See Computer Setup—File on page 42 in the
Computer Setup—File table.)
NOTE: It is recommended that you save any modied computer conguration settings to a USB ash media
device and save the device for possible future use.
To restore the conguration, insert the USB ash media device with the saved conguration and perform the
Restore from Removable Media command with the Computer Setup (F10) Utility. (See Computer Setup—File
on page 42 in the Computer Setup—File table.)
Recovering the Conguration Settings 47