HP 280 G3 - Computer Setup-File

Computer Setup—File
NOTE: Support for specic Computer Setup options may vary depending on the hardware conguration.
Option Description
System Information Lists:
●
Manufacturer
●
Product name
●
SKU number
●
Serial number
●
System family
●
Born on date
●
System board CT number
●
BIOS revision
●
BIOS date
●
Processor type
●
Processor speed
●
Installed memory size/speed, number of channels (single or dual) (if applicable)
About Displays copyright notice.
System Log Displays the system log.
Set Time and Date Allows you to set system time and date.
Default Setup Save Current Settings as Default
Saves the current system conguration settings as the default.
Restore Factory Settings as Default
Restores the factory system conguration settings as the default.
Apply Defaults and Exit Applies the currently selected default settings and clears any established passwords.
Ignore Changes and Exit Exits Computer Setup without applying or saving any changes.
Save Changes and Exit Saves changes to system conguration or default settings and exits Computer Setup.
42 Chapter 5 Computer Setup (F10) Utility