HP 382 - Backing Up, Restoring, and Updating Your Software; Backing Up Your System and Software

5
6. You would install
the new 8 Mbyte boards in RAM PAIR 0 slots. Enter this
information
in Table 5-2's 'Upgraded, RAM PAIR 0 and RAM PAIR l'
blocks as shown below:
Example Existing Memory vs. Upgraded Memory
Total RAM PAIR
0 RAM PAIR 1
Existing
8 MB
4MB4MB
Upgraded 24MB
8MB8MB
4 MB 4 MB
7. When you turned on your controller, the amount of RAM listed would be
about 25 165 524 bytes.
5·18 Memory Configurations