Performing the RAM Upgrade
Caution
Caution
A
static
charge of almost 40,000 volts can be generated on a
carpeted floor. This exceeds
the
limits
of
these RAM boards
and
can cause unsuccessful operation or damage.
Integrated circuits on printed circuit boards can be damaged by
electrostatic discharge.
Use
the
following precautions:
• Use
the
grounding wrist
strap
supplied with this upgrade.
Follow
the
instructions printed on
the
strap's
package.
• Do not wear clothing subject
to
static charge buildup, such
as wool or synthetic materials.
• Do
not
handle integrated circuits in carpeted areas.
• Do
not
remove
the
device from
its
anti-static
bag
until you
are ready
to
install
it.
• Avoid touching circuit leads as much as possible.
RAM boards must be removed from the highest-numbered slots
first.
Memory Configurations 5·19
5
To Next Page
Loading...
