Introduction
This guide is arranged into four categories:
Getting Started
This section gives an introduction to the instrument, and aims to make the
instrument familiar to you: Chapter 1.
Local Control
This is the information on how to control the instrument from the front panel:
Chapters 2 and 3.
Remote Control
This is the information on how to control the instrument over the HP-IB
. This
is made of general information for using the HP-IB
, a command reference, and
some programming examples.: Chapters 4, 5, and 6.
Additional Information
This is supporting information of a non-operational nature. This contains
installation information, accessories, specications, function tests, cleaning
procedures, and error codes: Appendices A through G.
Attenuator
Some information in this manual applies only to the tunable
laser source with the built in optical attenuator (option 003).
This paragraph is marked the way that all the passages which
only apply to the attenuator option are marked in this manual.
xiv
To Next Page
Loading...
