HP 8168E - Page 87

5
:LOCK Commands
:LOCK
Syntax :LOCK < wsp > OFF j ON j 0 j 1, < value >
Description This command switches the lock o and on.
Set the state to OFF or 0 to switch the lock o. Set the state
to ON or 1 to switch the lock on. The laser is switched o
immediately when the instrument is locked.
< value > is the four-gure password.
:LOCK?
Syntax :LOCK?
Description The query returns the current state of the lock.
A returned value of 0 indicates that the lock is o. A returned
value of 1 indicates that the lock is on.
Example OUTPUT 724;":LOCK ON, 8168"
OUTPUT 724;":LOCK?"
ENTER 724;A$
:OUTPut Commands
:OUTPut[:STATe]
Syntax :OUTPut [ :STATe ] < wsp > OFF j ON j 0 j 1
Description This command switches the laser current o and on.
Laser light emerges only when the current is on. Set the state
to OFF or 0 to switch the laser current o, set the state to ON
or 1 to switch the laser current on. The default is for the laser
current to be o.
Remote Commands 5-17