14-6 Security Features
Writer: Cheryl Love Saved by: Cheryl Love Saved date: 07/10/97 8:26 AM
Part Number: 247738-002 File name: Ch14.doc
Memory Compartment Security Screws
Two tamper-resistant screws are supplied with the computer to
provide security for the original system memory board and/or
optional memory expansion board(s).
To install the memory compartment security screws:
1. Shut down the computer and turn it upside down.
2. Use a Torx T-8 screwdriver to remove the two factory-
installed screws from the memory compartment cover.
3. Use the screwdriver supplied with the computer to insert the
two tamper-resistant screws.
Inserting the Memory Compartment Security Screws
To Next Page
Loading...
