HP Armada 7300 - Inserting a Drive into the Computer Multibay

Working with Removable Drives 6-15
Writer: Cheryl Love Saved by: Rebecca Wiggins Saved date: 08/12/97 10:13 AM
Part Number: 247738-002 File name: Ch06.doc
Inserting a Drive into the Computer MultiBay
IMPORTANT:
Before handling a removable drive, be sure you have
read the cautions under “Caring for Removable Drives” earlier in
this chapter.
NOTE:
For the steps to insert a hard drive into the hard drive
MultiBay adapter or to remove a diskette drive or CD-ROM drive
from the removable drive MultiBay adapter, see “Using MultiBay
Adapters” earlier in this chapter.
To insert a drive into the MultiBay:
1. In Windows 95, save your work and shut down the computer
to remove or insert a hard drive or a CD-ROM drive. Do not
remove or insert a drive when the computer is in Hibernation.
In Windows NT, shut down the computer to remove or insert a
hard drive. You can remove or insert a diskette drive or a
CD-ROM drive when the computer is on, in Suspend, or off.
Do not remove or insert a drive when the computer is in
Hibernation.
2. With the drive connector on the right facing in, slide the drive
into the MultiBay until it clicks into place.
Inserting a Drive into the Computer MultiBay