Need help?Do you have a question about the HP Armada 7300 and is the answer not in the manual?
Explains text conventions, formatting, and symbols used in the manual.
Lists items included in the expansion base packaging.
Outlines necessary components and configurations for desktop or tower systems.
Details steps for setting up the system without an external monitor.
Explains how to connect the keyboard and mouse to the expansion base.
Identifies and describes the component on the left side of the expansion base.
Identifies and describes components located on the front and top of the expansion base.
Identifies and describes components located on the right side of the expansion base.
Identifies and describes components located on the rear panel of the expansion base.
Explains how to connect various external devices to the system.
Describes how to connect and use audio equipment like headphones and speakers.
Guides on connecting the system to a network via modem.
Instructions for connecting the system to an Ethernet network.
Steps to prepare the computer for docking, including OS considerations.
Detailed procedure for physically docking the computer into the expansion base.
Instructions for removing the computer from the expansion base.
Explains how the system and devices can be locked using the keylock and cable lock.
Provides instructions on how to lock and unlock the system using the keylock.
Instructions for attaching a cable lock to secure the system to an object.
Explains when battery packs begin charging automatically when inserted into the MultiBay.
Step-by-step guide for inserting a battery pack into the expansion base's MultiBay.
Details how the two bays can be configured as MultiBays or drive bays.
Provides essential precautions for handling removable drives to prevent damage.
Explains the use of drive adapters for inserting drives into bays.
Explains how to add PC Cards to the expansion base.
Step-by-step guide for inserting a PC Card into the expansion base.
Step-by-step guide for removing a PC Card from the expansion base.
General procedure for installing PCI or ISA expansion boards.
Step-by-step guide for removing an expansion board from the slot.
Procedure for installing a standard half-height drive into the bay.
Procedure for removing a standard half-height drive from its bay.
Outlines the steps needed to prepare the system for conversion to a tower configuration.
Instructions for placing the expansion base into the tower stand.
Steps for docking the computer when the base is in a tower stand.
A list of basic checks to perform when encountering problems.
Provides solutions for common audio issues with the expansion base.
Solutions for problems encountered during docking and undocking the computer.
Solutions for common modem connection and performance issues.
Information on how to replace lost or stolen keys.
Lists contact numbers for Compaq assistance by region.
FCC notice regarding radio frequency emission limits and device classification.
CE marking compliance and European norms for EMC and safety.
Basic safety precautions when using modems or telephones.
Methods to prevent electrostatic damage when handling electronic components.
Procedures for grounding oneself before handling sensitive components.
Electrical ratings for the expansion base power supply.
Physical dimensions and weight of the expansion base.
Pin assignments for the Ethernet RJ-45 connector.
Pin assignments for the external monitor connector.
Pin assignments for the keyboard and mouse connectors.
To Next Page
General
