HP Armada 7300 - Connecting a Network Cable

3-12 Getting Connected
Writer: Karen Williams Saved by: Karen Williams Saved date: 01/27/98 10:55 AM
Part Number: 203118-001 File name: Ch03.doc
Connecting a Network Cable
This connection requires an unshielded twisted pair cable with
RJ-45 jacks at each end. Request the cable from your network
administrator or authorized service provider.
!
WARNING:
To reduce the risk of electric shock, fire, or
damage to the equipment, do not plug a telephone cable into
the Ethernet RJ-45 jack.
To connect the cable to the desktop expansion base and the
network jack, follow these steps:
1. Connect the cable to the RJ-45
1
jack on the expansion base.
2. Connect the other end of the cable to the network jack
2
.
Connecting the System to an Ethernet Network