1-12 Getting Started
Writer: Karen Williams Saved by: Karen Williams Saved date: 01/24/98 2:50 PM
Part Number: 203118-001 File name: CH01
Connecting the Keyboard, Mouse, and Monitor
To connect the keyboard, mouse, and monitor to the desktop
expansion base, follow these steps:
1. Connect the keyboard to one of the keyboard/mouse
connectors
1
on the rear panel of the expansion base.
2. If you have a PS/2-compatible mouse, connect it to the
remaining keyboard/mouse connector. If you have a serial
mouse, connect it to the serial connector
2
.
NOTE: If you are not certain whether you have a
PS/2-compatible or a serial mouse, refer to the documentation
that came with the mouse.
3. Ensure that the power switch on the external monitor is off.
4. Connect the external monitor cable to the external monitor
connector
3
.
5. Plug the external monitor power cord into an electrical outlet.
Identifying the Keyboard/Mouse Connectors, Serial Connector, and External Monitor
Connector on the Desktop Expansion Base
To Next Page
Loading...
