Getting Started 1-11
Writer: Karen Williams Saved by: Karen Williams Saved date: 01/24/98 2:50 PM
Part Number: 203118-001 File name: CH01
Installing the Monitor on a Monitor Support Cover
!
WARNING: To avoid the risk of personal injury or structural
damage to the monitor support cover, do not place a monitor with an
unstable base or a monitor heavier than 55 pounds (25 kilograms)
on the support cover. Place the monitor on a work surface next to
the docking base.
To install an optional external monitor on a monitor support
cover, follow these steps:
1. Ensure that the monitor power switch is turned off.
2. Place the expansion base on a flat surface near an
electrical outlet.
3. Place the monitor support cover on the desktop expansion
base. Ensure that the legs
1
of the monitor support cover fit
securely into the monitor support cover slots
2
.
4. Place the base of the monitor on the flat area toward the rear of
the monitor support cover.
Placing the Monitor Support Cover on the Desktop Expansion Base
To Next Page
Loading...
