HP Armada 7300 - Completing the Setup

Getting Started 1-13
Writer: Karen Williams Saved by: Karen Williams Saved date: 01/24/98 2:50 PM
Part Number: 203118-001 File name: CH01
Completing the Setup
To complete the setup of a desktop system with an external
monitor, follow these steps:
1. Turn off the computer, if it is on.
2. Close the computer, if it is open.
3. Follow the procedures in the previous section, “Setting Up the
System Without an External Monitor,” for
■ First, “Connecting the Expansion Base Power Cord.”
■ Second, “Docking the Computer.”
■ Third, “Turning On the System.”
4. Turn on the external monitor power switch.