8-4 Inserting and Removing PC Cards
Writer: Karen Williams Saved by: Karen Williams Saved date: 01/21/98 5:00 PM
Part Number: 203118-001 File name: Ch08.doc
Removing a PC Card
To remove a PC Card from the desktop expansion base, follow
these steps:
1. Unlock the expansion base keylock.
2. Turn off the system.
NOTE:
For information about removing a PC Card without
turning off the system, refer to your computer and
PC Card documentation.
3. If the PC Card door
1
is closed, open it by swinging it upward
from the bottom.
4. Slide the PC Card security post
2
to the right.
5. Press the PC Card eject button
3
.
6. Pull the PC Card out of the PC Card slot.
7. Push down on the base of the PC Card door to close it.
8. Restart the system, if appropriate.
Removing a PC Card from the Desktop Expansion Base
To Next Page
Loading...
