5-2 Securing the System
Writer: Karen Williams Saved by: Karen Williams Saved date: 01/24/98 3:06 PM
Part Number: 203118-001 File name: Ch05.doc
Locking Components with the Keylock
Locking the keylock secures the system as follows:
■
The motorized undocking mechanism is disabled.
■
The computer is anchored to the expansion base by the
docking latch.
■
The MultiBay device release latches on any MultiBays
and battery bays in the computer and the expansion base
are disabled.
■
The PC Card security post on the expansion base is locked
in place.
■
The rear panel release latch is disabled. This denies access to
❏
Any expansion boards installed in the expansion base.
❏
A 100BaseTX Ethernet Module or other component
installed on the input/output (I/O) board of the
expansion base.
❏
The manual release latch used to manually disconnect the
computer from the expansion base.
Locking the keylock does not secure the following items:
■
PC Cards in the computer.
■
Diskettes or CDs in the computer or the expansion base.