Getting Connected 3-7
Writer: Karen Williams Saved by: Karen Williams Saved date: 01/27/98 10:55 AM
Part Number: 203118-001 File name: Ch03.doc
Connecting an RJ-11 Jack
An RJ-11 jack can be connected to any standard (analog)
telephone wall jack, hotel data line, or office fax machine or
modem line in North America, Latin America, Japan, or
Hong Kong.
The connection requires a telephone cable such as the one
included with some integrated modem-equipped computers.
To connect the RJ-11 jack to an analog line, follow these steps:
1. Plug one end of a telephone cable into the RJ-11 jack on the
expansion base.
2. Plug the other end of the cable into an analog jack.
Connecting a 25-Pin Connector
A 25-pin connector can be connected to any standard telephone
wall jack in Europe or Asia Pacific.
The connection requires a country-specific modem cable, such as
the one included with some integrated modem-equipped
computers.
To connect the 25-pin connector to a telephone line, follow
these steps:
1. Connect the 25-pin connector on the country-specific modem
cable to the 25-pin connector on the expansion base.
2. Plug the other end of the cable into a telephone jack.
NOTE:
You need a country-specific modem cable for each country
in which you want to connect the expansion base. To purchase a
country-specific modem cable for use with a 25-pin connector or a
telephone cable for use with an RJ-11 jack, refer to “Worldwide
Telephone Numbers” in Appendix A for the name of the nearest
Compaq authorized dealer, reseller, or service provider.
To Next Page
Loading...
