HP Armada 7300 - Inserting the Desktop Expansion Base into an Optional Tower Stand

Setting Up a Tower System 11-3
Writer: Karen Williams Saved by: Rebecca Wiggins Saved date: 02/17/98 10:11 AM
Part Number: 203118-001 File name: CH11
Inserting the Desktop Expansion Base into an
Optional Tower Stand
1. Place the tower stand in a convenient location.
2. Set the expansion base into the tower stand left side down.
3. If you are converting from a desktop system, reconnect all
cables, cords, and external devices to the expansion base.
If you are setting up the system (the expansion base,
computer, and all connected external devices) for the first
time, follow the procedures in Chapter 1 for
■ First, “Connecting the Keyboard, Mouse, and Monitor.”
■ Second, “Connecting the Expansion Base Power Cord.”
Then proceed to “Docking the Computer in a Tower System,”
next in this chapter.
Setting the Desktop Expansion Base into the Optional Tower Stand