HP Armada 7300 - Installing and Removing a Half-Height Bay Device; Installing a Half-Height Bay Device

Installing and Removing a Half-Height Bay Device 10-1
Writer: Karen Williams Saved by: Karen Williams Saved date: 01/24/98 6:40 PM
Pages: 20 Words: 1959 Template: c:\template\ref\ref.dot
Part Number: 203118-001 File name: Ch10.doc
chapter
10
I
NSTALLING AND
R
EMOVING A
H
ALF
-H
EIGHT
B
AY
D
EVICE
Installing a Half-Height Bay Device
This procedure explains how to install a standard half-height drive
in a half-height bay. A half-height drive power cable is
preinstalled inside the desktop expansion base.
The procedures for installing an Armada 7000 Half-Height
MultiBay Adapter or an LTE 5000 Half-Height MultiBay
Adapter are similar. Refer to the adapter documentation for
specific instructions.
NOTE:
Use slotted Torx T-10 and T-15 screwdrivers.