EasyManua.ls Logo

HP Armada 7300 - Solving Battery Pack Charging Problems

HP Armada 7300
169 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12-4 Troubleshooting
Writer: Karen Williams Saved by: Rebecca Wiggins Saved date: 01/26/98 11:52 AM
Part Number: 203118-001 File name: Ch12.doc
Solving Audio Problems
Continued
Problem Possible Cause Solution
System volume
settings are lost
when a different
computer is docked.
Volume settings
are stored in
the computer.
Reset the expansion
base volume control
while the new computer
is docked.
Computer speakers
are mute when
computer is docked.
When computer is
docked, computer
speakers are disabled
and expansion base
speakers are enabled.
No action is necessary.
Solving Battery Pack Charging Problems
For information about battery pack charging sequence,
battery pack status displays, storing battery packs, and running
the computer from a battery pack, refer to your
computer documentation.
Solving Battery Pack Charging Problems
Problem Possible Cause Solution
Battery pack is
warm to the touch
after charging.
Warming occurs
during charging.
No action is necessary.
MultiBay light does
not turn on to
indicate battery pack
is charging.
Battery pack is
already fully charged.
Battery pack was
exposed to
temperature extremes.
No action is necessary.
Allow time for battery pack
to return to room
temperature.
Battery pack is at the
end of its life.
Replace the
battery pack.
Expansion base is
not receiving
electrical power.
Make sure power cord is
securely connected to
electrical outlet.
Verify electrical power
supply to outlet.
MultiBay release
latch does not
release battery pack
from MultiBay.
The keylock is locked. Unlock the keylock.

Table of Contents