HP Armada 7300 - Using the Suspend Button

Docking and Undocking 4-5
Writer: Karen Williams Saved by: Karen Williams Saved date: 01/24/98 2:59 PM
Part Number: 203118-001 File name: Ch04.doc
Using the Suspend Button
The suspend button functions only when a computer is docked.
You can use the suspend button on the expansion base as you do
the suspend button on the computer in these ways:
■
When the system is on, press the suspend button to
initiate Suspend.
■
When the system is in Suspend, press the suspend button to
exit Suspend.
The suspend button on the expansion base differs from the
suspend button on the computer in these ways:
■
If you have docked a computer while it is off, pressing the
suspend button on the expansion base turns the system on.
■
The suspend button on the expansion base cannot
be used with the
Fn
key on the computer keyboard to
initiate Hibernation.
NOTE:
Because power is continuously available to a docked
computer, Hibernation cannot be initiated while the computer
is docked.