Setting Up a Tower System 11-9
Writer: Karen Williams Saved by: Rebecca Wiggins Saved date: 02/17/98 10:11 AM
Part Number: 203118-001 File name: CH11
Completing the Setup
If you are setting up the system for the first time, complete the
setup by following these steps:
1. Turn on the system by following the instructions under
“Turning On the System” in Chapter 1.
2. Turn on the power switch on the external monitor.
To undock the computer, follow the instructions under
“Undocking the Computer” in Chapter 4. The undocking process
is the same for desktop and tower systems.
To Next Page
Loading...
