Identifying Components 2-7
Writer: Karen Williams Saved by: Karen Williams Saved date: 01/24/98 2:44 PM
Part Number: 203118-001 File name: Ch02.doc
Rear Panel Components
Continued
Component Function
8
Voltage select switch Adjusts expansion base to
supplied voltage.
9
Fan Circulates air through the expansion
base to cool internal components.
:
Security cable slot Attaches an optional security cable to
the expansion base.
;
25-pin connector The availability and use of this pass-
through modem connector varies
regionally. Please refer to
“Regional Differences” at the end of
this chapter.
<
RJ-11 jack The availability and use of this pass-
through modem connector varies
regionally. Please refer to
“Regional Differences” at the end of
this chapter.
=
MIDI/game connector Connects an optional joystick or
MIDI device.
>
External infrared transceiver
connector
Connects an optional External
Infrared Transceiver.
NOTE: This pass-through connector
functions only when an infrared-
equipped computer is docked.
?
Stereo line-in jack Connects an optional tape recorder,
tuner, or CD player.
@
Stereo line-out jack Connects optional external speakers.
A
Rear panel release latch Releases the rear panel of the
expansion base, allowing access to
the manual release latch and to
internal components.
B
External monitor connector Connects an optional external
monitor or overhead projector.
Regional Differences
The desktop expansion base connectors used for modem pass-
through vary by region.
■
An expansion base purchased for use in North America, Latin
America, Japan, or Hong Kong has an RJ-11 connector.
■
An expansion base purchased for use in Europe or Asia Pacific
(except Japan or Hong Kong) has a 25-pin connector.
To Next Page
Loading...
