HP Armada 7300 - Connecting to an Ethernet Network

Getting Connected 3-11
Writer: Karen Williams Saved by: Karen Williams Saved date: 01/27/98 10:55 AM
Part Number: 203118-001 File name: Ch03.doc
Connecting to an Ethernet Network
To connect the system to a 10BaseT Ethernet network
■
First, connect the system to the network with a network cable.
■
Second, install the drivers for your operating system.
To connect the system to a 100BaseTX Ethernet network, you
must first install an optional 100BaseTX Ethernet Module. For
information, refer to “Worldwide Telephone Numbers” in
Appendix A for a Compaq authorized dealer, reseller, or service
provider near you.
NOTE:
Installing an optional 100BaseTX Ethernet Module in a
system connected to a 10BaseT Ethernet network will not affect
system or network speed.