10-6 Installing and Removing a Half-Height Bay Device
Writer: Karen Williams Saved by: Karen Williams Saved date: 01/24/98 6:40 PM
Part Number: 203118-001 File name: Ch10.doc
3. Remove and retain the three screws from the top cover.
Removing the Screws from the Top Cover
4. Using both hands, grasp the top outside edges of the
top cover.
5. Lift the back edge of the top cover and swing it forward. The
top cover pivots off the expansion base along the front edge.
Removing the Top Cover
To Next Page
Loading...
