Getting Started 1-5
Writer: Karen Williams Saved by: Karen Williams Saved date: 01/24/98 2:50 PM
Part Number: 203118-001 File name: CH01
Connecting the Keyboard and Mouse
To connect the keyboard and mouse to the desktop expansion
base, follow these steps:
1. Place the expansion base on a flat surface near an
electrical outlet.
2. Connect the keyboard to one of the keyboard/mouse
connectors
1
.
3. If you have a PS/2-compatible mouse, connect it to the
remaining keyboard/mouse connector. If you have a serial
mouse, connect it to the serial connector
2
.
NOTE: If you are not certain whether you have a PS/2-compatible
or a serial mouse, refer to the documentation that came with
the mouse.
Identifying the Keyboard/Mouse Connectors and the Serial Connector on the Desktop
Expansion Base
To Next Page
Loading...
