Inserting and Removing PC Cards 8-3
Writer: Karen Williams Saved by: Karen Williams Saved date: 01/21/98 5:00 PM
Part Number: 203118-001 File name: Ch08.doc
4. If the PC Card security post
1
is blocking access to the PC
Card slot, slide it to the right.
5. Align the PC Card with the horizontal alignment rails
2
on
both sides of the PC Card slot. The 68-pin connector on the
PC Card should be facing the expansion base.
6. Gently push the PC Card into the slot until the PC Card eject
button
3
is flush with the face of the card.
CAUTION:
Forcing a PC Card into a slot can damage
the connectors.
Inserting a PC Card into the Desktop Expansion Base
7. If the PC Card does not have an extension or require cabling,
push down on the base of the PC Card door to close it.
8. If the PC Card requires cabling, refer to the PC Card
documentation for connection information.
9. Restart the system, if appropriate.
To Next Page
Loading...
