Upgrading RAM Memory 12-3
Writer: Cheryl Love Saved by: Cheryl Love Saved date: 07/10/97 8:20 AM
Part Number: 247738-002 File name: Ch12.doc
4. Turn the computer upside down.
5. Remove the two screws from the memory compartment
cover
1.
NOTE:
The tamper-resistant screws supplied with the computer
have a post in the middle of the screw head. Only the
screwdriver supplied with the computer removes those screws.
A Torx T-8 screwdriver removes the factory-installed screws.
6. Slide and lift the memory compartment cover to remove it 2.
Removing the Memory Compartment Cover
To Next Page
Loading...
