HP E Series User Manual

102 Specifications and characteristics
Table 25 Library component specifications
Characteristic Specification
HP 10642 rack with 1 PDU
Physical:
Weight
Dimensions (HxDxW)
Electrical:
AC voltage range
Load capacity
114.84 kg (253 lb)
199.9 x 100.8 x 61.0 cm
(78.7 x 39.7 x 24 in)
200–240 V, 50/60 Hz
3680 VA (@ 230 VAC)
Base module (12U) with 1 power supply, 2
tape drives, and robot (base module consists
of base unit (8U) and drive expansion module
(4U)
Physical:
Weight
Dimensions (HxDxW)
Electrical:
Power rating
Base unit: 45 kg (98 lb)
Drive expansion module: 20.5 kg (44.8 lb)
Base unit 35.6 x 81.1 x 48.0 cm
(14.0 x 31.9 x 18.9 in)
Drive expansion module: 17.8 x 81.1 x 48.0 cm
(7.0 x 31.9 x 18.9 in)
2 A (at 200 VAC) combined max peak
Card cage expansion module (4U)
Physical:
Weight (with 1 power supply and 3
e2400-FC 2G cards)
Dimensions (HxDxW)
Electrical:
Power rating
20 kg (43.8 lb)
17.8 x 76.3 x 48.0 cm
(7.0 x 30.0 x 18.9 in)
1.25 A (at 200 VAC)

HP E Series Specifications

General

Model	HP E Series
Category	Control Unit
Connectivity	Gigabit Ethernet
Ports	Multiple USB ports, serial ports, VGA port
Power Supply	Redundant power supplies with hot-swap capability
Display	Integrated LCD display for system monitoring and control
Processor	Intel Xeon series processors (specific model varies by configuration)
Memory	Up to 256GB DDR4 ECC Registered DIMMs (specific capacity varies by configuration)
Storage	Support for multiple SAS/SATA hard drives and SSDs (specific capacity and configuration varies by model)
Operating System	Compatible with various operating systems including Windows Server, Linux, and VMware ESXi
Dimensions	Rack-mountable form factor (1U, 2U, or 4U depending on the specific model)
Weight	Varies depending on configuration