HP E Series User Manual

56 Library operation
Home screen
The first screen displayed after library initialization is the Home screen (Figure 37). After the library status
is determined (ready, warning, or error), that status is displayed on the Home screen, and you can touch
the screen to access other functional and operational screens.
Figure 37 Home screen
OCP tabs and status bar
After touching the Home screen, you are presented with a navigation screen containing a status bar to
the left of an HP logo, two rows of tabs, and an area for detailed screen information in the center (see
Figure 38).
Figure 38 OCP navigation
The status bar is a quick indicator of library health. The bar is green when the library is functioning
normally, solid yellow during a warning condition, and solid red during an error condition. Touching the
status bar takes you to the Health Summary screen.
The detailed functions of the four top-level menu tabs (Status, Configuration, Operations, and Support)
are discussed later. Selecting any of these four tabs takes you to menu items under that screen category.
1 Top-level menu tabs
2 Status bar
3 HP logo
4 Detailed screen information area
5 Navigation tabs
1
2 3
4
5

HP E Series Specifications

General

Model	HP E Series
Category	Control Unit
Connectivity	Gigabit Ethernet
Ports	Multiple USB ports, serial ports, VGA port
Power Supply	Redundant power supplies with hot-swap capability
Display	Integrated LCD display for system monitoring and control
Processor	Intel Xeon series processors (specific model varies by configuration)
Memory	Up to 256GB DDR4 ECC Registered DIMMs (specific capacity varies by configuration)
Storage	Support for multiple SAS/SATA hard drives and SSDs (specific capacity and configuration varies by model)
Operating System	Compatible with various operating systems including Windows Server, Linux, and VMware ESXi
Dimensions	Rack-mountable form factor (1U, 2U, or 4U depending on the specific model)
Weight	Varies depending on configuration