HP E Series User Manual

34 Installing the Library
NOTE: Figure 17 shows the minimum floor space required by the library at its unboxing site. Unboxing
the library requires a minimum of 122 cm (4 ft) on all (1) sides. Side (2), used for the unloading ramp,
requires 3.05 m (10 ft). The minimum height required for unpacking the library is 2.16 m (85 in).
Figure 17 Minimum floor space requirements—unpacking site
3. Cut the bands (1) that secure the library and packing material to the pallet (see Figure 18).
Figure 18 Removing the bands
1 122 cm (4 ft) 2 3.05 m (10 ft)
1 Bands
10414
1
1
1
2
gl01001
1

HP E Series Specifications

General

Model	HP E Series
Category	Control Unit
Connectivity	Gigabit Ethernet
Ports	Multiple USB ports, serial ports, VGA port
Power Supply	Redundant power supplies with hot-swap capability
Display	Integrated LCD display for system monitoring and control
Processor	Intel Xeon series processors (specific model varies by configuration)
Memory	Up to 256GB DDR4 ECC Registered DIMMs (specific capacity varies by configuration)
Storage	Support for multiple SAS/SATA hard drives and SSDs (specific capacity and configuration varies by model)
Operating System	Compatible with various operating systems including Windows Server, Linux, and VMware ESXi
Dimensions	Rack-mountable form factor (1U, 2U, or 4U depending on the specific model)
Weight	Varies depending on configuration