HP FlexNetwork 5130 HI series User Manual

3
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
inbound: Displays inbound traffic statistics.
outbound: Displays outbound traffic statistics.
interface-type: Specifies an interface type.
interface-number: Specifies an interface number.
Usage guidelines
This command displays traffic statistics within a statistics polling interval specified by the
flow-interval command.
To clear the Ethernet interface traffic statistics, use the reset counters interface command. For
more information, see "reset counters interface."
If you do not spe
cify an interface type, this command displays traffic statistics for all interfaces that
have traffic counters.
If you specify an interface type but do not specify an interface number, this command displays traffic
statistics for all interfaces of the specified type.
If you specify an interface type and an interface number, this command displays traffic statistics of
the specified interface.
Examples
# Display inbound traffic statistics for all GigabitEthernet interfaces.
<Sysname> display counters inbound interface gigabitethernet
Interface Total (pkts) Broadcast (pkts) Multicast (pkts) Err (pkts)
GE1/0/1 100 100 0 0
GE1/0/2 0 0 0 0
GE1/0/3 Overflow Overflow Overflow Overflow
GE1/0/4 0 0 0 0
Overflow: More than 14 digits (7 digits for column "Err").
--: Not supported.
Table 1 Command output
Field Description
Interface Abbreviated interface name.
Total (pkts) Total number of packets received or sent through the interface.
Broadcast (pkts) Total number of broadcast packets received or sent through the interface.
Multicast (pkts) Total number of multicast packets received or sent through the interface.
Err (pkts) Total number of error packets received or sent through the interface.
Overflow: More than 14
digits (7 digits for column
"Err")
The command displays
Overflow
if any of the following cases applies:
• The data length of an Err field value is greater than 7 decimal digits.
• The data length of a non-Err field value is greater than 14 decimal digits.

HP FlexNetwork 5130 HI series Specifications

General

Brand	HP
Model	FlexNetwork 5130 HI series
Category	Switch
Language	English