91
Field Description
Aggregate Interface Name of the aggregate interface.
Aggregation Mode
Aggregation group type:
• S—Static.
• D—Dynamic.
System ID
Local system ID, containing the local system LACP priority and the local system
MAC address.
Local
Information about the local end:
• Port—Port type and number.
• Status—Port state, which can be Selected or Unselected.
• Priority—Port priority.
• Oper-Key—Operational key.
• Flag—LACP state flag.
NOTE:
For static aggregation groups, the
Flag
field is not displayed.
Remote
Information about the peer end:
• Actor—Type and number of the local port.
• Partner—Index of the peer port.
• Priority—Priority of the peer port.
• Oper-Key—Operational key of the peer port.
• System ID—System ID of the peer end.
• Flag—LACP state flag of the peer end.
interface bridge-aggregation
Use interface bridge-aggregation to create a Layer 2 aggregate interface and enter Layer 2
aggregate interface view.
Use undo interface bridge-aggregation to delete a Layer 2 aggregate interface.
Syntax
interface bridge-aggregation interface-number
undo interface bridge-aggregation interface-number
Default
No Layer 2 aggregate interface is created.
Views
System view
Predefined user roles
network-admin
Parameters
interface-number: Specifies a Layer 2 aggregate interface number in the range of 1 to 1024.
Usage guidelines
When you create a Layer 2 aggregate interface, the system automatically creates a Layer 2
aggregation group with the same number. The aggregation group operates in static aggregation
mode by default.
To Next Page
Loading...
