HP FlexNetwork 5130 HI series User Manual

250
LLDP commands
display lldp local-information
Use display lldp local-information to display local LLDP information, which will be contained in the
advertisable LLDP TLVs and sent to neighboring devices.
Syntax
display lldp local-information [ global | interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
global: Displays the global local LLDP information.
interface interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
If no keyword or argument is specified, this command displays all local LLDP information, which
includes the following:
• The global LLDP information.
• The LLDP information about the LLDP-enabled ports in up state.
Examples
# Display all local LLDP information.
<Sysname> display lldp local-information
Global LLDP local-information:
Chassis ID : 0079-9556-d080
System name : HPE
System description : HPE Comware Platform Software, Software Version 7.1.045,
Release 1121
HPE 5130 24G PoE+ 4SFP+ 1-slot HI Switch
Copyright (c) 2010-2016 Hewlett Packard Enterprise
Development LP
System capabilities supported : Bridge, Router, Customer Bridge, Service Bridge
System capabilities enabled : Bridge, Router, Customer Bridge
MED information:
Device class : Connectivity device
MED inventory information of master board:
HardwareRev : Ver.A
FirmwareRev : 103
SoftwareRev : 7.1.045 Alpha 1102
SerialNum : 210235A1G00000000001
Manufacturer name : HPE

HP FlexNetwork 5130 HI series Specifications

General

Brand	HP
Model	FlexNetwork 5130 HI series
Category	Switch
Language	English