266
Field Description
Reinit delay LLDP reinitialization delay.
Transmit max credit Token bucket size for sending LLDP frames.
Trap interval Trap transmission interval.
Fast start times
Number of LLDP frames sent each time fast LLDP frame transmission
is triggered.
Port 1 LLDP status of port 1.
Port status of LLDP Indicates whether LLDP is enabled on the port.
Admin status
LLDP operating mode of the port:
• Tx_Rx—The port can send and receive LLDP frames.
• Rx_Only—The port can only receive LLDP frames.
• Tx_Only—The port can only send LLDP frames.
• Disable—The port cannot send or receive LLDP frames.
Trap Flag Indicates whether trapping is enabled.
Polling interval LLDP polling interval, which is 0 when LLDP polling is disabled.
Number of neighbors Number of LLDP neighbors connecting to the port.
Number of MED neighbors Number of MED neighbors connecting to the port.
Number of CDP neighbors Number of CDP neighbors connecting to the port.
Number of sent optional TLV
Number of optional TLVs contained in an LLDP frame sent through the
port.
Number of received unknown TLV Number of unknown TLVs contained in a received LLDP frame.
display lldp tlv-config
Use display lldp tlv-config to display the types of advertisable optional LLDP TLVs of a port.
Syntax
display lldp tlv-config [ interface interface-type interface-number ] [ agent { nearest-bridge |
nearest-customer | nearest-nontpmr } ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
agent: Specifies an LLDP agent type. If no agent type is specified, the command displays the types
of advertisable optional LLDP TLVs for all LLDP agents.
nearest-bridge: Specifies nearest bridge agents.
nearest-customer: Specifies nearest customer bridge agents.
nearest-nontpmr: Specifies nearest non-TPMR bridge agents.
To Next Page
Loading...
Need help?
General