HP FlexNetwork 5130 HI series

242
Table 54 Command output
Field Description
Interface Interface name.
GigabitEthernet1/0/1 QinQ-enabled interface.
Related commands
qinq enable
qinq enable
Use qinq enable to enable QinQ on an Ethernet interface.
Use undo qinq enable to restore the default.
Syntax
qinq enable
undo qinq enable
Default
QinQ is disabled on Ethernet interfaces.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
Examples
# Enable QinQ on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qinq enable
Related commands
display qinq
qinq ethernet-type customer-tag
Use qinq ethernet-type customer-tag to configure the CVLAN TPID.
Use undo qinq ethernet-type customer-tag to restore the default CVLAN TPID.
Syntax
qinq ethernet-type customer-tag hex-value
undo qinq ethernet-type customer-tag
Default
The CVLAN TPID is 0x8100.
Views
System view