173
Related commands
display interface vlan-interface
name
Use name to configure a name for a VLAN.
Use undo name to restore the default.
Syntax
name text
undo name
Default
The name of a VLAN is VLAN vlan-id. The vlan-id argument specifies the VLAN ID in a four-digit
format. If the VLAN ID has fewer than four digits, leading zeros are added. For example, the name of
VLAN 100 is VLAN 0100.
Views
VLAN view
Predefined user roles
network-admin
Parameters
text: Specifies a VLAN name, a string of 1 to 32 characters. The string can include case-sensitive
letters, digits, special symbols (see Table 35), spaces, and other Unicode chara
cters and symbols.
Usage guidelines
You can configure VLAN names for VLAN identification. When 802.1X or MAC authentication is
configured on a device, you can specify VLANs by name on the RADIUS server for authorization
VLAN assignment.
Examples
# Configure the name of VLAN 2 as test vlan.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] name test vlan
Related commands
display vlan
service
Use service to specify an IRF member device for forwarding the traffic on the current VLAN
interface.
Use undo service to restore the default.
Syntax
service slot slot-number
undo service slot
Default
No IRF member devices are specified for forwarding the traffic on the VLAN interface.
To Next Page
Loading...
Need help?
General