197
[Sysname-vlan3] protocol-vlan 1 ipv4
Related commands
• display protocol-vlan interface
• display protocol-vlan vlan
• port protocol-vlan
VLAN group commands
display vlan-group
Use display vlan-group to display VLAN group information.
Syntax
display vlan-group [ group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-name: Specifies a VLAN group by its name, a case-sensitive string of 1 to 31 characters. The
first character must be an alphabetical character. If you do not specify this argument, the command
displays information about all VLAN groups.
Examples
# Display information about the VLAN group test001.
<Sysname> display vlan-group test001
VLAN group: test001
VLAN list: 2-4 100 200
# Display information about all VLAN groups.
<Sysname> display vlan-group
VLAN group: test001
VLAN list: 2-4 100 200
VLAN group: rnd
VLAN list: Null
Table 45 Command output
Field Description
VLAN group Name of the VLAN group.
VLAN list VLAN list in the VLAN group.
Related commands
vlan-group
vlan-list
To Next Page
Loading...
Need help?
General