165
This command might fail to restore the default settings for some commands for reasons such as
command dependencies or system restrictions. Use the display this command in interface view to
identify these commands, and then use their undo forms or follow the command reference to restore
their default settings. If your restoration attempt still fails, follow the error message instructions to
resolve the problem.
Examples
# Restore the default settings for VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] default
description
Use description to configure the description for a VLAN or VLAN interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
For a VLAN, the description is VLAN vlan-id. The vlan-id argument specifies the VLAN ID in a
four-digit format. If the VLAN ID has fewer than four digits, leading zeros are added. For example, the
default description of VLAN 100 is VLAN 0100.
For a VLAN interface, the description is the name of the interface. For example, Vlan-interface1
Interface.
Views
VLAN view, VLAN interface view
Predefined user roles
network-admin
Parameters
text: Specifies a description for a VLAN or VLAN interface, a string of 1 to 255 characters. The string
can include case-sensitive letters, digits, special symbols (see Table 35), spa
ces, and other Unicode
characters and symbols.
Table 35 Special symbols
Name Symbol Name Symbol
Tilde ~ Left angle bracket <
Exclamation point ! Right angle bracket >
At sign @ Hyphen -
Pound sign # Underscore _
Dollar sign $ Plus sign +
Percent sign % Equal sign =
Caret ^ Vertical bar |
Ampersand sign & Back slash \
Asterisk * Colon :
To Next Page
Loading...
Need help?
General