EasyManuals Logo
Home>HP>Switch>FlexNetwork 5130 HI series

HP FlexNetwork 5130 HI series User Manual

HP FlexNetwork 5130 HI series
306 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #209 background imageLoading...
Page #209 background image
201
Tagged ports: None
Untagged ports:
GigabitEthernet1/0/3
VLAN ID: 4
VLAN type: Static
It is a sub VLAN.
Route interface: Configured
IPv4 address: 10.153.17.41
IPv4 subnet mask: 255.255.252.0
IPv6 global unicast addresses:
2001::1, subnet is 2001::/64 [TENTATIVE]
Description: VLAN 0004
Name: VLAN 0004
Tagged ports: None
Untagged ports:
GigabitEthernet1/0/4
Table 46 Command output
Field Description
VLAN type VLAN type:
Dynamic
or
Static
.
Route interface Whether a VLAN interface is configured for the VLAN.
IPv4 address
Primary IPv4 address of the VLAN interface. This field is displayed only
when an IPv4 address is configured for the VLAN interface.
When the VLAN interface is also configured with secondary IPv4
addresses, you can view them by using one of the following commands:
• display interface vlan-interface.
• display this (VLAN interface view).
IPv4 subnet mask
Subnet mask for the primary IPv4 address of the VLAN interface. This
field is displayed only when an IPv4 address is configured for the VLAN
interface.
IPv6 global unicast addresses
Global unicast IPv6 address of the VLAN interface. This field is not
displayed when no IPv6 address is configured for the VLAN interface.
The IPv6 address states are as follows:
• TENTATIVE—Initial state. DAD is being performed or is to be
performed on the address. An address in this state cannot be used
as the source address or destination address of packets.
• DUPLICATE—DAD has been completed for the address. The
address is not unique on the link and cannot be used.
• PREFERRED—The address is preferred and can be used as the
source or destination address of a packet. If an address is in this
state, the command does not display the address state.
• DEPRECATED—The address is beyond the preferred lifetime but
within the valid lifetime. It is valid, but it cannot be used as the
source address for a new connection. Packets destined to the
address are processed correctly.
Description VLAN description.
Name VLAN name.
Tagged ports Tagged members of the VLAN.
Untagged ports Untagged members of the VLAN.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP FlexNetwork 5130 HI series and is the answer not in the manual?

HP FlexNetwork 5130 HI series Specifications

General IconGeneral
BrandHP
ModelFlexNetwork 5130 HI series
CategorySwitch
LanguageEnglish

Related product manuals