• Management Processor Blank (present when Management Processor not installed)
• PCI I/O Backplane Assembly
• CPU(s) and associated Power Pods
• CPU Airflow guide (single CPU systems only)
• Memory DIMMs
• DVD or CD-ROM
• DVD Filler (present when a DVD or CD-ROM is not installed)
• Disk(s)
• Disk Filler(s) (present on disk-less systems)
• Display Panel
3. You will have to reconfigure the system boot settings at EFI.
4. Follow the instructions that accompany the new base unit to return the hardware to
Hewlett-Packard.
68 Removing and Replacing Components
To Next Page
Loading...
Need help?
General