Chapter 5
Troubleshooting
Running Diagnostic Software Tools
102
Shell> fs0:
fs0:>
Step 3. Navigate to the EFI\BOOT directory on the CD:
a. Change to the EFI directory on the diagnostics CD.
fs0:> cd EFI
fs0\EFI:>
b. Execute the ls command to list the contents of the directory.
fs0:\EFI> ls
Directory of: fs0:\EF
11/07/02 04:41p <DIR> 1,024 .
11/07/02 04:41p <DIR> 0 ..
11/07/02 04:41p <DIR> 1,024 HP
11/07/02 04:45p <DIR> 1,024 BOOT
0 File(s) 0 bytes
4 Dir(s)
c. Change to the BOOT subdirectory.
fs0\EFI:> cd BOOT
fs0\EFI\BOOT:>
d. Execute the ls command to list the contents of the directory.
fs0:\EFI\BOOT> ls
Directory of: fs0:\EFI\BOOT
11/07/02 04:45p <DIR> 1,024 .
11/07/02 04:45p <DIR> 1,024 ..
11/07/02 01:54p 731,136 LaunchMenu.efi
11/07/02 01:54p 2,763 IO.ini
11/07/02 01:54p 731,136 BOOTIA64.EFI
11/07/02 01:54p 2,995 LaunchMenu.ini
11/07/02 01:54p 3,977 View_Doc.ini
5 File(s) 1,472,007 bytes
2 Dir(s)
Step 4. Execute the LaunchMenu command to reboot from the CD and launch e-DiagTools.
fs0:\BOOT> launchmenu
Step 5. If you are not familiar with e-DiagTools, review the documentation.
From the main menu:
a. Select View Release Notes and Documentation Menu to view a list of available documentation.
b. Select View e-DiagTools Info to open the overview document.
Step 6. If you are already familiar with e-DiagTools, select Run e-DiagTools for IPF from the main
menu.
To Next Page
Loading...
Need help?
General