Chapter 4
Utilities
Using the Boot Option Maintenance Menu
60
• When changes are made to either Output or Error console menus, the identical change must be made in
both menus.
• When changing serial devices, changes must be made to Output, Input, and Error menus for proper
operation.
Using the System Configuration Menu
The System Configuration Menu (on systems with EFI firmware version 2.0 or higher) includes the following
options:
• The Security/Password Menu lets you change the administrator and user passwords
• The Advanced System Information Menu displays information about system and component
configuration
• Set System Date lets you modify the system date
• Set System Time lets you modify the system time
• Reset Configuration to Default lets you restore system settings to their original configuration
• Help displays additional information about the available options
• Exit returns to the EFI startup menu
Security/Password Menu
You can set administrator and user passwords to provide different levels of access to the system firmware:
Resetting Passwords
If you forget your passwords, they can be reset using an MP command. Follow theses steps.
• If your system has an MP card:
Run the MP card bp command to reset the administrator and user passwords (see “Management
Processor Command Interface”).
• If your system does not have an MP card, you must reset the passwords using a jumper on the system
board:
Step 1. Power down the system and unplug the AC power cord.
To Next Page
Loading...
Need help?
General