HP NonStop SSH Reference Manual STN Reference • 259
• ACTION: Contact support.
zstn-evt-application-loop value is 1018
"<STN process name> STN Application <2> is looping on window <3>"
• CAUSE: An application has repeatedly attempted to perform output to a terminated session. (See STNCOM
command REPLY_MAX_DELAY). The application process name and STN window name are displayed. This
message is displayed once per session.
• EFFECT: None; informational only
• ACTION: Review the application for proper error handling..
zstn-evt-window-socket-err value is 1019
"<STN process name> Subnet <$subnet> <#window> <error-code> socket error <operation>"
• CAUSE: TCP/IP communications error.
• EFFECT: The session is terminated.
• ACTION: None; informational only.
zstn-evt-auditcoll-start value is 1020
"<STN process name> AUDITCOLL started to collector <$coll> version <stn-version>
• CAUSE: STNCOM command AUDITCOLL was used to open an EMS collector. This event is written to the
specified collector, not to the standard $0 EMS event collector.
• EFFECT: Audit-type events will be written to the specified collector.
• ACTION: None; informational only.
zstn-evt-auditcoll-stop value is 1021
"<STN process name> AUDITCOLL stopped
• CAUSE: STNCOM command AUDITCOLL OFF was used. This event is written to the specified collector, not
to the standard $0 EMS event collector.
• EFFECT: None; informational only.
• ACTION: None; informational only.
zstn-evt-auditcoll-sslmiscerr value is 1022
"<STN process name> AUDITCOLL sslmiscerr <window> <IP-address> <IP-port> <text>"
• CAUSE: Generated when STNCOM command AUDITMSG is used, and when the number of sessions
permitted by LICENSE file parameter USERS is exceeded. This event is written to the specified collector, not
to the standard $0 EMS event collector.
• EFFECT: T None; informational only.
• ACTION: None; informational only.
To Next Page
Loading...
