HP Notebook Series User Manual

3–4 Hardware and Software Guide
Power
Hibernation
Ä
CAUTION: If the configuration of the notebook system is changed during
Hibernation, it may not be possible to restore from Hibernation. When the
notebook is in Hibernation:
■ Do not add or remove memory modules.
■ Do not insert or remove the internal hard drive.
■ Do not connect or disconnect external devices.
■ Do not insert or remove a CD or DVD.
■ Do not insert a PC Card, SD Memory Card, SDIO Card, Memory
Stick, Memory Stick Pro, Smart Media Card, xD Picture Card, or
MultiMediaCard.
Hibernation takes a snapshot of the current system memory, saves
it to the hard drive, and then shuts down the notebook. When you
restore from Hibernation, your work returns to the screen exactly
as you left it.
When possible, save your work before initiating Hibernation to
prevent loss of data. Do not change the notebook configuration
during Hibernation.
If you cannot restore from Hibernation when power is restored
to
the system, you will be prompted to delete the restoration data
and proceed with the system boot. Unsaved data will be lost. If a
power-on password has been set, the password must be entered to
restore from Hibernation.
Hibernation is enabled by default but can be disabled. To reduce
the risk of power loss during a low battery condition, disable
Hibernation only during a battery pack calibration.

HP Notebook Series Specifications

General

Category	Laptop
Series	Notebook Series
Processor	Varies by model (e.g., Intel Core i3/i5/i7, AMD Ryzen)
RAM	Varies by model (e.g., 4GB, 8GB, 16GB)
Storage	Varies by model (e.g., 256GB SSD, 1TB HDD)
Display	14-inch to 17.3-inch HD or FHD (varies by model)
Operating System	Windows 10 or Windows 11 (varies by model)
Graphics	Integrated Intel or AMD Graphics or Discrete NVIDIA or AMD Graphics (varies by model)
Battery	Varies by model
Weight	Varies by model