HP Notebook Series - Navigating and Selecting in the Setup Utility; Restoring Setup Utility Default Settings; Exiting the Setup Utility

9–14 Hardware and Software Guide
Software Updates, Restorations and Utilities
Navigating and Selecting in the Setup Utility
Because the Setup utility is not based on Windows, it does not
support the TouchPad. Navigation and selection are by keystroke.
■ To navigate, use the up and down arrow keys or tab.
■ To select an item, use the arrow keys to select the item, and
then press
enter.
■ To close a display but remain in the Setup utility, press esc.
An on-screen guide to navigation and selection is displayed at the
lower edge of most Setup utility submenu screens. To minimize
keystrokes by using the <Alt> Key Activates Accelerators
feature:
1. Press and hold alt. (A letter or number in most on-screen
items is highlighted.)
2. Press the keyboard key corresponding to the highlighted
letter or number in the item you want to select.
For example, to select an on-screen OK button, press alt.
When the “O” in OK is highlighted, press
O.
Restoring Setup Utility Default Settings
To return all Setup utility settings to default values, select File >
Restore Defaults. (Identification information, including ROM
version information, is retained.)
Exiting the Setup Utility
■ To close the utility and save your changes from the current
session, select File > Exit Saving Changes.
■ To close the utility without saving changes from the current
session, select File > Exit Discarding Changes.
When you select either option, the Setup utility closes, and then
Windows opens.