HP Notebook Series User Manual

Specifications
Hardware and Software Guide A–3
Rated Input Power
The notebook operates on DC power, which can be supplied
by
an AC or a DC power source. Although the notebook can
be
powered from a stand-alone DC power source, it is strongly
recommended that the notebook be powered only with a
supported AC
adapter.
The notebook is capable of accepting DC power within the
following specifications.
This product is designed for IT power systems in Norway with
phase-to-phase voltage not exceeding 240 Vrms.
Expansion Port Input/Output Signals
The expansion port signal information in this section may be
helpful if you plan to use an optional notebook product that
connects to the expansion port 2 on your notebook.
The expansion port 2 is illustrated in the section “Right-Side
Components” in Chapter 1.
✎
The notebook has only one expansion port. The term expansion
port 2 describes the type of expansion port.
Optional HP expansion products that connect to the notebook
expansion port 2 include an HP xb2000 Notebook Expansion
Base or an HP xc2000 Notebook All-in-One Media Cable.
Input Power Rating
Operating voltage 19.0 V dc @ 7.1 A/9.5 A –
135 W/180 W*
Operating current 7.1 A/9.5 A
*Refer to the rating marked on your notebook.

HP Notebook Series Specifications

General

Category	Laptop
Series	Notebook Series
Processor	Varies by model (e.g., Intel Core i3/i5/i7, AMD Ryzen)
RAM	Varies by model (e.g., 4GB, 8GB, 16GB)
Storage	Varies by model (e.g., 256GB SSD, 1TB HDD)
Display	14-inch to 17.3-inch HD or FHD (varies by model)
Operating System	Windows 10 or Windows 11 (varies by model)
Graphics	Integrated Intel or AMD Graphics or Discrete NVIDIA or AMD Graphics (varies by model)
Battery	Varies by model
Weight	Varies by model