HP Notebook Series User Manual

3–22 Hardware and Software Guide
Power
Discharging the Battery Pack
Hibernation is enabled by default but can be disabled. Before you
begin the full discharge, disable Hibernation. To disable
Hibernation:
1. Select Start > Control Panel > Performance and
Maintenance > Power Options > Hibernate tab.
2. Clear the Enable Hibernation check box.
3. Click Apply.
Ä
CAUTION: If you plan to leave the notebook unattended during
discharge, save your work before starting the discharge procedure.
To fully discharge the battery pack:
1. Select the power icon on the taskbar or select Start >
Control Panel > Performance and Maintenance > Power
Options > Power Schemes tab.
2. Make a note of all settings in the Plugged In column and all
settings in the Running On Batteries column, so you can
reset them after calibration.
3. Use the lists to set each item in both columns to Never.
4. Select OK.
5. Disconnect the notebook from the external power source, but
do not turn off the notebook.
6. Run the notebook on battery power until the battery pack is
fully discharged. The battery light will blink when the
notebook has reached a low-battery condition. When the
battery pack is fully discharged, the battery light turns off and
the notebook shuts down.

HP Notebook Series Specifications

General

Category	Laptop
Series	Notebook Series
Processor	Varies by model (e.g., Intel Core i3/i5/i7, AMD Ryzen)
RAM	Varies by model (e.g., 4GB, 8GB, 16GB)
Storage	Varies by model (e.g., 256GB SSD, 1TB HDD)
Display	14-inch to 17.3-inch HD or FHD (varies by model)
Operating System	Windows 10 or Windows 11 (varies by model)
Graphics	Integrated Intel or AMD Graphics or Discrete NVIDIA or AMD Graphics (varies by model)
Battery	Varies by model
Weight	Varies by model